| 【Performance and characteristics】 | 【性能及特点】 |
| • Powered by compressed air. | • 由压缩空气提供动力。 |
| • The solenoid valve is controlled by the host PLC or the oil pump controller to determine the oil supply cycle of the lubrication system. | • 电磁阀由上位PLC或油泵控制器控制，决定润滑系统的供油周期。 |
| • The solenoid valve is electrified to control the pneumatic pump, and the electrification time of the solenoid valve is ≥5 seconds. | • 电磁阀通电控制气动泵，电磁阀通电时间≥5秒。 |
| • The solenoid valve is de-energized and the pneumatic pump is depressurized, and the solenoid valve is de-energized for ≥ 20 seconds. | • 电磁阀断电，气动泵减压，电磁阀断电时间≥20 秒。 |
| • A pressure switch is set at the end of the system to monitor the interruption and pressure loss of the main oil pipeline of the lubrication system. | • 系统末端设有压力开关，用于监测润滑系统主油路的中断和压力损失。 |
| • Equipped with low liquid level transmitter, which can output low liquid level signal. | • 配备低液位变送器，可输出低液位信号。 |
| • Equipped with an automatic pressure relief device, the lubrication pump stops running, and the system automatically relieves pressure. | • 配有自动泄压装置，润滑泵停止运行，系统自动泄压。 |
| • Use oil viscosity: 10-1000cSt. | • 使用油粘度：10-1000cSt。 |
| Note: 1. Please use the specified clean lubricating oil; 2. Input compressed air within the specified pressure range. | 注意：1、请使用规定的清洁润滑油； 2、输入规定压力范围内的压缩空气。 |
@ 2024 Sino Solutions, All Rights Reserved.
