| 【Performance and characteristics】 | 【性能与特点】 |
| • The system is configured with 3 action modes. | • 系统配置3种动作模式。 |
| a. Lubricating: when turning on, execute lubricating timing. | a.润滑：开机时，执行润滑计时。 |
| b. Intermittent: execute intermittent timing after lubricating is completed. | b.间歇：润滑完成后，进行间歇计时。 |
| c. Memory: in case of power on after power on, resume incomplete intermittent time. | c.记忆功能：断电后再次通电时，恢复未完成的间歇时间。 |
| • Lubricating time and intermittent time can be adjusted. (Built-in locking function, and lubricating and intermittent time after setting is locked). | • 润滑时间及间歇时间可调（内置锁定功能，设定后的润滑及间歇时间均被锁定）。 |
| • Provided with liquid level switch and pressure switch (optional). When oil volume or pressure is insufficient, the beeper makes sound, send alarm and offers abnormal signal output. | • 配备液位开关、压力开关（选配），当油量或压力不足时，蜂鸣器发出声音、报警，并提供异常信号输出。 |
| a. When pressure is insufficient, Erp is displayed. | a.压力不足时，显示Erp。 |
| b. When liquid level is insufficient, Ero is displayed. | b.当液位不足时，显示Ero。 |
| • The system time can be configured, LUB lubricating time: 1-999 (seconds) INT intermittent time: 1-999 (minutes) (tailored if specially required) | • 系统时间可配置，LUB润滑时间：1-999（秒）INT间歇时间：1-999（分钟）（特殊要求可定制） |
| • The panel indicator displays lubricating and intermittent status. | • 面板指示器显示润滑及间歇状态。 |
| • The system uses RST key to force lubricating or eliminate abnormal reporting signal. | • 系统使用RST键强制润滑或消除异常报告信号。 |
| • Motor continuously operated | • 电机连续运转 |
| • Decompression device is provided with volumetric system, used with BFA/BFC/BFD distributor. | • 减压装置配有容积系统，与BFA/BFC/BFD分配器配合使用。 |
@ 2024 Sino Solutions, All Rights Reserved.
