| 【Performance and characteristics】 | 【性能特点】 |
| • Liquid level switch and pressure switch (optional) are provided. When oil volume or pressure is insufficient, abnormal signal is output, | • 设有液位开关、压力开关（选配），当油量或压力不足时，输出异常信号， |
| • The panel indicator light indicates power and lubrication status of the oil injection mold. | • 面板指示灯指示注油模具电源及润滑状态。 |
| • The system is provided with FEED key, and compulsory lubrication is applied. | • 系统设有FEED键，采用强制润滑。 |
| • Motor continuously operated | • 电机连续运转 |
| • The volumetric system is provided with decompression device, and shall be used with BFA/BFC/BFD distributor. | • 容积系统设有减压装置，需与BFA/BFC/BFD分配器配合使用。 |
| • Overflow valve is provided to prevent damage by oil injector and pipeline. | • 设有溢流阀，防止注油器及管路损坏。 |
| • Internal fuse is provided to prevent IC board and motor damaged by short circuit. | • 设有内部保险丝，防止短路损坏IC板及电机。 |
@ 2024 Sino Solutions, All Rights Reserved.
