| 【Perfomance and characteristics】 | 【性能特点】 |
| •Liquid level switch and pressure switch (optional) are provided. When oil volume or pressure is insufficient,abnormal signal is output. | •设有液位开关及压力开关（选配），当油量或压力不足时，输出异常信号。 |
| •The panel indicator light indicates power and lubrication status if the oil injection mold. | •注油模具，面板指示灯指示电源及润滑状态。 |
| •The system is provided with FEED key, and compulsory lubrication is applied. | •系统设有FEED键，采用强制润滑。 |
| •Time setting: single maximum lubrication duration ≤2min,and the intermittent time is at least 5 times of the lubricating time. | •时间设定：单次最大润滑时长≤2min，间歇时间至少为润滑时间的5倍。 |
| •The motor is provided with self-protection to prevent high temperature and overload of motor. | •电机设有自我保护，防止电机高温、过载。 |
| •No decompression device is provided with resistance-type system,used with proportional joint distributor. | •电阻式系统无减压装置，与比例接头分配器配合使用。 |
| •Overflow valve is provided to prevent damage by oil injector and pipeline.Internal fuse is provided to prevent IC board and motor damaged by short circuit. | •设有溢流阀，防止注油器及管路损坏。内部设有保险丝，防止短路损坏IC板及电机。 |
@ 2024 Sino Solutions, All Rights Reserved.
