| Number of spits : 7 | 吐出口数 ： 7 |
| Commonly used discharge volume ML/CY : 0.06、0.10、0.20、0.30、0.40、0.50 | 常用吐出量 ML/CY ： 0.06、0.10、0.20、0.30、0.40、0.50 |
| Action guarantee pressure kgf/cm2 : Thin Oil 12~15kgf/cm2 Grease 20~25kgf/cm2 | 作动保证压力 kgf/cm2 ： 稀油 12~15kgf/cm2 油脂 20~25kgf/cm2 |
| Use oil viscosity c .st: Thin Oil 30~500cst Grease 00#~000# | 使用油剂粘度c .st : 稀油 30~500cst 油脂 00#~000# |
| When the oil pump is pressurized, the metering shaft pops up to store oil. | 油泵加压时计量轴弹出储油 |
| When the oil pump releases pressure, the spring automatically returns to release oil. | 油泵泄压时弹簧自动复位出油 |
| Adopt multiple sealing technology, no backflow | 采用多重密封技术，不回流 |
| The main body is made of zinc alloy die-casting and pure copper connectors | 主体采用锌合金压铸，纯铜接头 |
| The corresponding amount of oil can be selected according to the amount of oil required by the lubrication point. | 可根据润滑点需油量，选择相应油量 |
| Special note: If you need to order dispenser models with different discharge volumes on the same row of dispensers.For example, DLM-322040 is a 2-position thin oil distributor. The oil output of the first position is 0.2ml/each time.The oil output of the second position is 0.4ml/each time. | 特别说明：如需订购在同一排分配器上吐出量不同的分配器型号时。 例DLM-322040，这是一款2位的稀油分配器，第1位出油量为0.2ml/每次， 第2位出油量为0.4ml/每次。 |
@ 2024 Sino Solutions, All Rights Reserved.
