• Oil volume is indicated as follows (Notes: When oil volume of all oil outlets is the same, only one oil volume level is indicated). | • 油量指示如下(注:当所有出油口油量相同时,仅指示一种油量级别)。 |
• Example 1; GFA-05-02 means the oil ejection volumes of positions 1, 2, 3, 4 and 5 of the 5-position distributor , and oil ejection volume shall be 0.2ml/time. | • 示例1; GFA-05-02表示五位分配器1、2、3、4、5位的喷油量,喷油量为0.2ml/次。 |
• Example 2: GFA-05-53235 means the oil ejection volumes of positions 1, 2, 3, 4 and 5 of the 5-position distributor, and oil ejection volume shall be 0.5, 0.3, 0.2,0.3 and 0.5mL/time. | • 例2:GFA-05-53235表示五位分配器的1、2、3、4、5位喷油量,喷油量为0.5、0.3、0.2、0.3、0.5mL/次。 |
【Schematic diagram of the GFA distributor】 | 【GFA分配器示意图】 |
•The lubricant conveyed from the oil injector shall be pulled up from the umbrella valve in the GFA distributor. | •从注油器输送来的润滑油从GFA分配器中的伞阀中拉起。 |
•When the umbrella valve seals the oil outlet port,the oil pressure forces GFA oil storage block to overcome the spring force to lower the oil level,and the oil cavity starts to store oil. | •当伞阀封住出油口时,油压迫使GFA储油块克服弹簧力使油位降低,油腔开始储油。 |
•When GFA oil storage block is pushed to the top of the oil cavity,oil storage of the GFA is completed. | •当GFA储油块被推到油腔顶端时,GFA储油完成。 |
•When the oil pump stops supplying oil, the unloading valve is opened automatically, and the main oil pipe injects oil into it, and the system pressure is lowered down. The umbrella valve resets and seals the inlet oil, and the GFA oil storage block starts to eject lubricant in the oil cavity. | •当油泵停止供油时,卸荷阀自动打开,主油管向其中注油,系统压力降低,伞阀复位并封住进油,GFA储油块开始将油腔中的润滑油喷出。 |
@ 2024 Sino Solutions, All Rights Reserved.