BTA-C2 PLC Control Thin Oil Lubricating Resin Oil Tank控制稀油润滑泵

SKU: BTA-C2

Product Description
  • Pressure Switch 2L/3L/4L
  • Single Phase 220V 200cc/min Connected to ф 6pipe
  • Liquid level switch and pressure switch (optional) are provided.When oil volume or pressure is insufficient,abnormal signal is output.
  • The panel indicator light indicates power and lubrication status of the oil injection mold.
  • The system is provided with FEED key,and compulsory lubrication is applied.
  • Time setting: single maximum lubrication duration ≤2min, and intermittent time shall be 5 times of the lubricating time.
  • The motor is provided with self-protection to prevent high temperature and overload of motor.
  • The volumetric system is provided with decompression device, use with BFA/BFB/BFC/BFD/BFE/BFG distributor.
  • Overflow valve is provided to prevent damage by oil injection and pipeline.
  • Internal fuse is provided to prevent IC board and motor damaged by short circuit.

 

  • 压力开关2L/3L/4L
  • 单相220V 200cc/min 连接 ф 6管
  • 设有液位开关，压力开关(可选配)。当油量或压力不足时可将异常信号输出。
  • 面板指示灯可显示出注油机的通电和润滑状态。
  • 系统中设有”FEED”键，可强制润滑。
  • 时间设定: 单次最长润滑时间≤2min，间歇时间通常为润滑时间的5倍以上。
  • 电机设有自我保护功能，防止电机温度过高及过载。
  • 在容积式系统中设有脱压装置，需配合BFA/BFB/BFC/BFD/BFE/BFG分配器使用。
  • 设有溢流阀，可保护注油机及管路由于压力过高而损坏。
  • 内部配有保险丝防止短路导致电流过大烧坏1C扳和电机。

Whatsapp
Facebook Instagram Map-marker-alt
BAOTN BANNER INFORMATION-01
RESTAT INFORMATION BANNER-01 (1)
SINO BANNER INFORMATION-01

@ 2024 Sino Solutions, All Rights Reserved.

Let's Chat