BTB-C1 PLC Control Thin Oil Lubricating Pump 控制稀油润滑泵

SKU: BTB-C1

Product Description
  • Pressure Switch 4L/6L/8L
  • 1-phase 220V 300cc/min Connected to ф 6pipe
  • Liquid level switch and pressure switch (optional) are provided.When oil volume or pressure is insufficient, abnormal signal is output.
  • The panel indicator light indicates power and lubrication status of the oil injection mold.
  • The system is provided with FEED key, and compulsory lubrication is applied.
  • Motor continuosly operated
  • No decompression device is provided with resistance-type system, used with proportional joint distributor.
  • Overflow valve is provided to prevent damage by oil injector and pipeline.
  • Internal fuse is provided to prevent IC board and motor damaged by short circuit.

 

  •  压力开关 4L/6L/8L
  • 单相 220V 300cc/min 接 ф 6管
  • 配备液位开关、压力开关（选配），当油量或压力不足时，输出异常信号。
  • 面板指示灯指示注油模具的电源及润滑状态。 •系统设有FEED键，采用强制润滑。
  • 电机连续运转
  • 阻力式系统无减压装置，与比例接头分配器配合使用。
  • 设有溢流阀，防止喷油器及管路损坏。
  • 设有内部保险丝，防止短路损坏IC板及电机。

Whatsapp
Facebook Instagram Map-marker-alt
BAOTN BANNER INFORMATION-01
RESTAT INFORMATION BANNER-01 (1)
SINO BANNER INFORMATION-01

@ 2024 Sino Solutions, All Rights Reserved.

Let's Chat