BTA-C2 Sheet Metal Oil Tank钣金油箱

SKU: BTA-C3

Product Description
  • Pressure Switch 4L/6L/8L
  • Liquid level switch and pressure switch (optional) are provided.When oil volume or pressure is insufficient,abnormal signal is output.
  • The panel indicator light indicates power and lubrication status of the oil injection mold.
  • The system is provided with FEED key,and compulsory lubrication is applied.
  • Time setting: single maximum lubrication duration ≤2min, and intermittent time shall be 5 times of the lubricating time.
  • The motor is provided with self-protection to prevent high temperature and overload of motor.
  • The volumetric system is provided with decompression device,use with BFA/BFB/BFC/BFD/BFE/BFG distributor.
  • Overflow valve is provided to prevent damage by oil injection and pipeline.
  • Internal fuse is provided to prevent IC board and motor damaged by short circuit.

 

  • 压力 开关4L/6L/8L
  • 配备液位开关及压力开关（选配），当油量或压力不足时，输出异常信号。
  • 面板指示灯指示注油模具电源及润滑状态。
  • 系统设有FEED键，采用强制润滑。
  • 时间设定：单次最大润滑时长≤2min，间歇时间为润滑时间的5倍。
  • 电机设有自我保护，防止电机高温、过载。
  • 容积系统设有减压装置，与BFA/BFB/BFC/BFD/BFE/BFG分配器配合使用。
  • 设有溢流阀，防止注油及管路损坏。
  • 内部设有保险丝，防止短路损坏IC板及电机。

Whatsapp
Facebook Instagram Map-marker-alt
BAOTN BANNER INFORMATION-01
RESTAT INFORMATION BANNER-01 (1)
SINO BANNER INFORMATION-01

@ 2024 Sino Solutions, All Rights Reserved.

Let's Chat